EBOT303

 

Device features:
Build Volume 300 x 300 x 300 mm (11.8 x 11.8 x 11.8 in)
Material Container Spool
Material Diameter 1,75 mm (0.069 in)
Nozzle Diameter Nozzle diameter               0,4 mm (0.016 in)
Extruder Single
Platform Perforated, heated
Support Mechanically removed – printed with the same material as the model
Connectivity SD card (included)
Available Materials PLA, ABS, PET, Nylon, TPU (Flexible) and PC
External Materials Applicable
In the Box 3D printer, 2 spools of material, side covers, SD card, build platform, heat-bed cable, power cable
Linear Guide 20 mm HIWIN
Ball Screw 12 mm TBI
Motors Stepper Motors NEMA 17
Motors Drivers High resolution stepper motor drivers 32 bit
Key Dimensions/ Weight:
3D Printer (W x D x H) 490 x 490 x 690 mm
Printer Weight 45 kg (67.5 lbs)
Technology LPD (Layer Plastic Deposition) – depositing melted material layer by layer onto the build platform
Layer Resolution 90-290 microns
Minimal Wall Thickness 400 microns
Dimensional Accuracy +/- 0 – 2%
Angle Accuracy +/- 0 – 2%
X/Y Positioning Accuracy 1.5 micron
Z-axis Single Step 1.25 micron
Platform Leveling manual
Maximum Platform Temperature 105 ˚C (221 °F)
Maximum Printing Temperature (Extruder) 290 ˚C (554 °F)
Ambient operation Temperature 20 – 30 ˚C (68 °- 86 °F)
Storage Temperature 0 – 35 ˚C (32 ˚- 95 ˚F)
AC input 110 V ~ 5.9 A 50/60 Hz

240 V ~ 2.5 A 50/60 Hz

Power supply parameters 12V DC @ 20 A, 500 W
Maximum power consumption 1000 W